5 Options
5.1 Energy recovery
5.1.1 Energy recovery unit
Description
A large part of the energy required for any compression process is transformed into heat. The
major part of the compression heat is dissipated through the oil system. Energy Recovery (ER)
systems are designed to recover most of this heat by transforming it into warm or hot water
without any adverse effects on compressor performance. The water can be used for diverse
applications.
Components
The energy recovery system is completely integrated and comprises the following:
• Stainless steel oil/water heat exchanger
• Thermostatic by-pass valve for energy recovery heat exchanger (BV2)
• Two temperature sensors for water inlet and outlet control (3 and 4)
• The necessary bolts, pipes, etc.
• Pressure relieve valve with pressure setting of 10 bar
• Oil drain valve
Instruction book
2920 7110 05 63
To Next Page
Loading...
Need help?
General
