Transport using a forklift truck
WARNING Hydraulic attachment tipping over
The hydraulic attachment tipping over and falling
from the fork of the forklift truck may cause serious
injury.
► Move the fork of the forklift truck under the
hydraulic attachment so that the centre of gravity
is between the prongs.
♦
Slowly lift the hydraulic attachment.
♦
Transport the hydraulic attachment to its intended
destination.
♦
Place the hydraulic attachment on timber support
blocks.
Transport using a truck
WARNING Hydraulic attachment tipping over
/ slipping
The hydraulic attachment slipping or tipping over and
falling from the loading surface of a lorry may cause
serious injury.
► Put the hydraulic attachment on an anti-slip mat.
► Secure the hydraulic attachment to the loading
surface with ropes or chains; use any available
transport lugs.
♦
Secure the hydraulic attachment to the loading
surface as shown in the following illustration.
♦
Observe all the applicable national/regional
regulations on securing loads.
19© 2012 Atlas Copco Construction Tools GmbH | No. 3390 5096 01 | 2012-04-26
Original instructions
TRANSPORTHB 3100, 3100 DP, 3600, 3600 DP, 4100, 4100 DP,
4700, 4700 DP
To Next Page
Loading...
Need help?
General
