Atlas Copco HC 150

DISPOSAL
NOTICE Environmental damage due to
consumables
Hydraulic oil and cutter grease are environmentally
harmful and must not penetrate the ground or enter
the water table or water supplies.
► Collect any such consumables which may escape.
► Dispose of them in accordance with the applicable
environmental regulations.
Hydraulic attachment
♦
Remove the hydraulic attachment from the carrier
(see chapter Removing the hydraulic attachment
from the carrier).
♦
Remove the adapter plate (see chapter Removing
the adapter plate).
♦
Remove the hydraulic hoses from the hydraulic
attachment.
♦
Clean the hydraulic attachment (see chapter
Cleaning).
♦
Dispose of the hydraulic attachment in line with
all applicable regulations or consult an authorised
and specialised recycling company.
Hydraulic hoses
♦
Drain the hydraulic oil from the hydraulic hoses
and collect it.
♦
Dispose of the hydraulic hoses in accordance with
the applicable regulations to avoid environmental
hazards.
Hydraulic oil
♦
Collect any hydraulic oil that escapes.
♦
Dispose of it in accordance with the applicable
environmental regulations.
Motor oil and oil containers
♦
Dispose of motor oil and not completely emptied
oil containers (canisters, tins, etc.) in accordance
with the applicable regulations.
♦
Completely emptied oil containers can be recycled.
49© 2014 Construction Tools EOOD | No. 3390 5121 01 | 2014-11-19
Original instructions
DISPOSALHC 150, 350, 450, 850, 1050, 1055