EasyManua.ls Logo

Atlas Copco HC 150

Atlas Copco HC 150
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL SPECIFICATIONS
Hydraulic compactor HC 150 - HC 450
HC 450HC 350HC 150Model
4 - 93 - 8 t1 - 3 tCarrier weight class
1
8818 - 19842 lbs6614 - 17637 lbs2205 - 6614 lbs
430 kg320 kg160 kgService weight
2
948 lbs705 lbs353 lbs
Dimensions
622 mm623 mm486 mmHeight
24.49 in.24.53 in.19.13 in.
610 x 929 mm475 x 846 mm295 x 721 mmPlate (width x length)
24.02 x 36.57 in.18.70 x 33.31 in.11.61 x 28.39 in.
0.40 m
2
0.31 m
2
0.17 m
2
Plate coverage
620.00 in.
2
480.50 in.
2
263.50 in.
2
3.6 t2.3 t1.4 tImpact force
7937 lbs5071 lbs3086 lbs
2200 n/min2100 n/min2100 n/minVibration frequency
150 bar150 bar150 barOperating pressure
2176 psi2176 psi2176 psi
76 l/min57 l/min30 l/minOil flow
20.1 gal (US)/min15.1 gal (US)/min7.9 gal (US)/min
10 bar10 bar10 barMaximum return line pressure
150 psi150 psi150 psi
0.9 l0.8 l0.6 lMotor oil quantity
0.24 gal (US)/min0.21 gal (US)/min0.16 gal (US)/min(in rotor housing)
69 L
P
dB(A)67 L
P
dB(A)69 L
P
dB(A)Sound pressure level
(measured r = 10 m)
106 L
WA
dB(A)106 L
WA
dB(A)106 L
WA
dB(A)Sound power level
3
(guaranteed)
M36 x 2M22 x 1.5M22 x 1.5Connecting thread
conical seal 24°conical seal 24°conical seal 24°(»P« and »T«)
JIC 12, 1 1/16" UNFJIC 12, 1 1/16" UNFJIC 8, 3/4" UNFPort connectors
(type: male thread)
Min. inside diameter
20 mm12 mm12 mmHoses
0.79 in.0.47 in.0.47 in.
20 mm12 mm12 mmPipes
0.79 in.0.47 in.0.47 in.
Pipework
25 x 2.5 mm15 x 1.5 mm15 x 1.5 mmDiameter and wall thickness
0.98 x 0.10 in.0.59 x 0.06 in.0.59 x 0.06 in.
SB 202SB 202SB 102Hole pattern (adapter plate)
1
Weight apply to standard carriers only.
Any variations must be agreed with Atlas Copco and / or the carrier manufacturer prior to attachment.
2
Hydraulic compactor including adapter plate of medium size
Please note that the service weight can be considerably higher, depending on the adapter plate.
3
EN ISO 3744 in accordance with Directive 2000/14/EC.
© 2014 Construction Tools EOOD | No. 3390 5121 01 | 2014-11-19
Original instructions
50
HC 150, 350, 450, 850, 1050, 1055TECHNICAL SPECIFICATIONS

Table of Contents