Hydraulic system, changing the hydraulic
oil
1. Remove the dipstick (A).
2. Use an oil suction pipe to empty the hydraulic oil
from the tank.
3. Clean the tank opening and breather filter (B).
4. Fill with new hydraulic oil.
5. Refit the dipstick (A).
Disposal
A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in accordance with local restrictions.
Before a fuel driven machine is deposited it must be
emptied and cleaned of all oil and fuel. Remaining
oil and fuel must be dealt with in a way that does not
adversely affect the environment.
Always send used filters, drained oil and fuel
remnants to environmentally correct disposal.
Storage
♦
Empty the fuel tank before storing the machine.
♦
Clean the machine.
♦
Clean the air filter.
♦
Wipe off any oil and dust that has accumulated
on the rubber parts.
♦
Cover the machine and store it in a dry, dust-free
area.
31© 2016 Construction Tools EOOD | No. 9800 1721 01 | 2016-04-07
Original instructions
Safety and operating instructionsLG 504
To Next Page
Loading...
