EasyManuals Logo

Atlas Copco LG 504 User Manual

Atlas Copco LG 504
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Noise and vibration declaration statement
Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to EN ISO 11201, EN 500-4.
Vibration value determined according to EN 500-4. See table ”Noise and vibration data” for the values etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other machines tested in accordance
with the same directive or standards. These declared values are not suitable for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
machine is used, as well as upon the exposure time and the physical condition of the user, and the condition
of the machine.
We, Construction Tools EOOD, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
This machine may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
Noise and vibration data
VibrationNoise
Declared valuesDeclared values
Three axes valuesSound powerSound pressure
EN 500-42000/14/ECEN ISO 11201
permitted
working
hours/day
m/s
2
value
Lw
measured dB(A)
rel 1pW
Lw
guaranteed
dB(A) rel 1pW
Lp
at operator's earType
82.510810996LG 504 electric
Permitted working hours per day are calculated on action value of 2.5 m/s
2
as per 2002/44/EC.
Uncertainties, sound value
Uncertainties, sound value
K
pa
dB(A)K
wa
dB(A)
Type
2.5-3.01.5-2.5LG 504 electric
Uncertainty factor for gravel bed.
33© 2016 Construction Tools EOOD | No. 9800 1721 01 | 2016-04-07
Original instructions
Safety and operating instructionsLG 504

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atlas Copco LG 504 and is the answer not in the manual?

Atlas Copco LG 504 Specifications

General IconGeneral
BrandAtlas Copco
ModelLG 504
CategoryPower Tool
LanguageEnglish

Related product manuals