4. When moving short distances, the machine can
be tilted forward, so that it rests on the plastic
wheels on the handle. Lift with the lower lifting
handle (D) and roll the machine forwards and
backwards.
Lifting
WARNING Lifting hazard
During lifting the machine can fall down this can
cause serious injury.
► Never walk or stand under a lifted machine.
► Keep your feet away from the machine.
1. Always use the machine's lifting eye (A) to lift the
machine.
2. The lifting equipment must be in dimensioned in
order to fulfil all regulations. Before lifting check
that shock absorbers (B) and lifting eye (A) are
correctly attached and not damaged.
Operation
WARNING Involuntary start
Involuntary start of the machine may cause injury.
► Keep your hands away from the start and stop
device until you are ready to start the machine.
► Learn how the machine is switched off in the event
of an emergency.
Start and stop
Before starting
Follow the general precautions supplied with the
machine at the delivery. We recommend you to study
the engine manual supplied with the machine.
Check that the maintenance has been carried out.
We recommend that you also read the detailed
engine instructions supplied with the machine.
1. The rammer must be standing straight up when
the oil level is checked in the engine.
2. Fill the fuel tank with fuel.
3. Check that all the controls are working.
4. Make sure that there is no leakage of oil, and
that all bolted joints are tightened.
5. Check that the hood knob (A) is locked.
Throttle, engine switch and fuel tap control
© 2015 Construction Tools EOOD | No. 9800 1415 01b | 2015-05-26
Original instructions
16
LT 6005Safety and operating instructions
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
