Technical data
Machine data
Rammer leg width 280 mm (11 in.)Rammer leg width 230 mm (9 in.)LT 6005
Engine
Honda GXR 120, 4-stroke, manual startHonda GXR 120, 4-stroke, manual startManufacture/Model
2.6 (3.48)2.6 (3.48)Power kW (hp)
3,7503,750Rated speed (r.p.m)
1,600-1,9001,600–1,900Idling (r.p.m)
Compaction data
11.9 (714)11.9 (714)Vibration frequency, Hz (r.p.m)
65-75 (2.5-2.9)65-75 (2.5-2.9)Amplitude, mm (in)
Performance
15- 18 (49 - 59)15 - 18 (49 - 59)Working speed, m/min (feet/min)
Fluid volumes
3.0 (3.2)3.0 (3.2)Fuel tank capacity, litres (qts)
0.3 (0.31)0.3 (0.31)Crankcase oil capacity, litres (qts)
0.8 (0.84)0.8 (0.84)Fuel consumption, litres/hours (qts)
0.9 (0.95)0.9 (0.95)Rammer leg, litres (qts)
Lubricants
Petrol (gasoline)Petrol (gasoline)Fuel type
Shell Rimula R4 L 15W-40Shell Rimula R4 L 15W-40Engine oil
Shell Rimula R4 L 15W-40Shell Rimula R4 L 15W-40Rammer leg oil
Weights and volumes
69 (151)68 (149)Weight, kg (lb)
70 (154)69 (151)Operating weight, EN500, kg (lb)
Noise and vibration declaration statement
Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to EN ISO 11201, EN 500-4.
Vibration value determined according to EN 500-4. See table ”Noise and vibration data” for the values etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other machines tested in accordance
with the same directive or standards. These declared values are not suitable for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
machine is used, as well as upon the exposure time and the physical condition of the user, and the condition
of the machine.
We, Construction Tools EOOD, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
This machine may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be obtained from Discount-equipment
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
© 2015 Construction Tools EOOD | No. 9800 1415 01b | 2015-05-26
Original instructions
24
LT 6005Safety and operating instructions
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
