Start label on fuel tank
A. Read the instruction manual.
B. Set the throttle, engine switch, and fuel tap
control to start mode.
C. Close the choke.
D. Pump the primer pump.
E. Start the engine.
F. Open the choke.
G. Warm up the engine.
H. Work mode.
Operating
1. Set the throttle, engine switch and fuel tap control
(A) in working mode, and the rammer will start
to move forward.
2. Steer the rammer with the handle (B).
3. Make sure the rammer shoe (C) is impacting
parallel to the ground.
4. Never overload or force the machine.
When taking a break
♦
Stop the machine during breaks.
♦
During all breaks, put the machine away so that
there is no risk for unintentional start.
Maintenance
Regular maintenance is a basic requirement for the
continued safe and efficient use of the machine.
Follow the maintenance instructions carefully.
19© 2015 Construction Tools EOOD | No. 9800 1415 01b | 2015-05-26
Original instructions
Safety and operating instructionsLT 6005
To order go to Discount-Equipment.com
To Next Page
Loading...