Changing the engine oil
1. Unscrew the oil plug (A).
2. Empty the oil into a container.
3. Refit the oil plug.
4. Fill with new oil (B).
5. Check the engine speed.
Changing the oil in the spring-loaded leg
1. Unscrew the oil drain plug (A).
2. Empty the oil into a container.
3. Refit the plug and tighten, make sure that the
sealing washer is undamaged.
4. Remove the sight glass (B) and fill with new oil.
5. Refit the sight glass and tighten. The oil level
must be at the middle of the sight glass.
Every 100 hours of operation
(weekly)
Maintenance routines:
♦
Replace air filter.
♦
Change the engine oil. See the engine manual for
more information.
♦
Check and clean the spark plug.
♦
Check the vibration dampers.
♦
Check the engine speed. See the engine manual
for more information.
♦
Clean the silencer's spark arrester.
Checking the spark plug
Check and clean and if necessary replace the spark
plug (A).
Every 500 hours of operation
(yearly)
Maintenance routines:
♦
Adjust valve head clearance for intake and exhaust
valves.
♦
Clean and check fuel filter and tank.
♦
Change the oil in the spring-loaded leg.
♦
Clean the engine's cooling flanges. See the engine
manual for more information.
♦
Change the oil in the engine. See the engine
manual for more information.
♦
Drain the fuel system of water.
♦
Replace the fuel filter.
© 2015 Construction Tools EOOD | No. 9800 1415 01b | 2015-05-26
Original instructions
22
LT 6005Safety and operating instructions
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
