EasyManua.ls Logo

Atlas Copco LT 6005 - Hood Knob Check and Disposal; Machine Storage

Atlas Copco LT 6005
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Replace the air filter or check the air filter indicator.
Checking the hood knob
Check that the hood knob (A) is in good condition.
Disposal
A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in accordance with local restrictions.
Before a fuel driven machine is deposited it must be
emptied and cleaned of all oil and fuel. Remaining
oil and fuel must be dealt with in a way that does not
adversely affect the environment.
Always send used filters, drained oil and fuel
remnants to environmentally correct disposal.
Storage
Empty the tank before storing the machine.
Clean the machine. Remove clay and sand from
the shoe.
Clean the air filter.
Carefully pull the start handle until you feel a slight
resistance.
Wipe off any oil and dust that has accumulated
on the rubber parts.
Apply a light coat of oil on the shoe to prevent it
from rusting.
Cover the machine and store it in a dry, dust-free
area.
23© 2015 Construction Tools EOOD | No. 9800 1415 01b | 2015-05-26
Original instructions
Safety and operating instructionsLT 6005
To order go to Discount-Equipment.com

Table of Contents

Related product manuals