A. Working mode position
Throttle control fully opened
Fuel tap fully opened
Engine switch in position ON
B. Start/Idling speed position
Throttle control half opened
Fuel tap fully opened
Engine switch in position ON
C. Stop position
Throttle control closed
Fuel tap closed
Engine switch in position OFF
Starting the engine
1. Set the throttle, engine switch and fuel tap control
(A) in starting mode.
2. Pump at least five times on the primer pump (B)
if the engine is cold.
3. Close the choke (C) if the engine is cold; if the
engine is warm or the ambient temperature is
high, push the choke in halfway or leave open.
17© 2015 Construction Tools EOOD | No. 9800 1415 01b | 2015-05-26
Original instructions
Safety and operating instructionsLT 6005
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
