Atlas Copco MT Focus 400 - Batch Control; Auto-Start Function

Operation EN MT Focus 400
16
© Atlas Copco Industrial Technique AB - 9836 6294 01
Batch control
To set the batch size:
1. Press either the UP or the DOWN button
2. Select Batch control in the menu.
3. Press OK.
4. Select Set batch size in the menu.
5. Press OK.
6. If required, enter the password. Use the OK button to select a position and the UP or the DOWN but-
tons to select the number.
7. Select the number of tightenings in the batch.
8. Press OK.
To increment the batch number:
1. Press either the UP or the DOWN button
2. Select Batch control in the menu.
3. Press OK.
4. Select Increment batch in the menu.
5. Press OK.
To decrement the batch number:
1. Press either the UP or the DOWN button
2. Select Batch control in the menu.
3. Press OK.
4. Select Decrement batch in the menu.
5. Press OK.
To reset the batch number:
1. Press either the UP or the DOWN button
2. Select Batch control in the menu.
3. Press OK.
4. Select Reset batch in the menu.
5. Press OK.
Auto-start
If Auto-start has been enabled from ToolsTalk, an extra menu option, Auto-start, appears.
To activate Auto-start:
1. Select Auto-start control in the menu.
2. Press OK.
3. Select Auto-start ON.
4. Press OK.