Atlas Copco PowerROC T30 E

Operator’s instructions
2. Technical data
20
2. Technical data
PowerROC T30 E
Weight (standard equipped without drill steel and optional equipment)
PowerROC T30 E
Weight with RHS and counterweights 11500 kg
Winch 280 kg
Performance
Diesel engine, Cummins QSB 4.5 Tier 4
power output at 2000 rpm 116 kW
Temperature range in operation -25 ºC to +50 ºC
Tramming speed, max. 1,1/3,1 km/h
Thrust 95/37 kN
Ground pressure, average 0.15 N/mm2
Ground clearance 340 mm
Max. hydraulic pressure 230 bar
Track oscillation ±15°
Noise level
Idling (800 rpm) 97 dB(A)
Full engine speed (2000 rpm) 106 dB(A)
Drilling (2000 rpm) 124 dB(A)
LWA (guaranteed value in accordance with
2000/14/EC) 128 dB(A)
Inclination angles
Note
Stability is specified with respect to CE standards stipulating that rigs must not be
operated on inclinations steeper than 20 degrees without the use of a winch.
Inclination angles - tramming
downward/upward, max. without winch 20°/20º
downward/upward, max. with winch 30º/30º
laterally, max. 20°/20°
Inclination angles for drill rig when drilling:
longitudinally, max. (Upward/Downward) 20°/20º
Lateral (left/right) 4º/10°