Operator’s instructions
4. Control
44
Control lever for rod handling
The control lever is fitted on a separate box located on the right-hand side of the front
control panel.
Figure: Control lever for rod handling
Table: Control lever for rod handling
9Lower drill steel support, closing/opening
Lever positions
Centre NEUTRAL POSITION/LOOSE GRIP
Front ARM TO MAGAZINE
Rear ARM TO DRILL CENTRE/HARD GRIP
Left ROTATE CAROUSEL CLOCKWISE
Right ROTATE CAROUSEL ANTICLOCKWISE
Top c ontac t
Depressed OPEN GRIPPER
Not
depressed
CLOSED GRIPPER
To Next Page
Loading...
