- 30 -
LOG list display
This view shows the alarm memory and gives access
to it.
An overview is given in “LOG list” on page 33.
Service timer 1 & Service timer 2 display
This view shows both Service timers. The service
timer indication is shown when service time has run
out. It can be removed by resetting the timers or
acknowledging the Service timer indication.
The service timer indications count and give an alarm
when value is reached.
Resetting the Service Timers can be done through the
Parameter display.
Battery Voltage display
This view shows the Battery voltage and the running
hours.
Coolant temperature display
This view shows the Coolant temperature and the
running hours.
See also “Parameter list” on page 31 for selection
between °C and °F.
Oil pressure display
This view shows the Oil pressure and the running
hours.
See also “Parameter list” on page 31 for selection
between bar and psi.
Fuel level display
This view shows the Fuel level and the running hours.
To Next Page
Loading...
