EasyManua.ls Logo

Atlas Copco QLT H40

Atlas Copco QLT H40
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 17 -
6. Turn the handle (7) at the top of the supporting
foot to lower the foot.
Aligning the spotlights
1. Check that the glass panes of the lights are in good
condition (1)
2. Adjust the inclination of the spotlight using the
wheels (2) placed at the sides of the spotlight.
3. Adjust the rotation of the spotlight using the
adjusting lever (3) on the bracket of the support.
4. Proceed with the extension of the mast as
described below.
Extending the mast
1. Check that the emergency push button (1) has not
been pushed. (If it has been pushed, a message
will appear on the display and an acoustic alarm
will sound.)
Once the lighting tower is correctly
positioned, fix the earth rod (the
copper bar for earthing (9)) and
make sure that it is correctly
connected to the lighting tower.
The mast cannot be raised if the
hand brake is not applied.
If the hand brake is released while
the mast is still up, the mast will
descend to its initial position or until
the hand brake is applied (this will
be signalled through an intermittent
alarm sound).

Related product manuals