Need help?Do you have a question about the Atlas Copco HiLight B6+ Kd ESF and is the answer not in the manual?
General| Model | HiLight B6+ Kd ESF |
|---|---|
| Light Source | LED |
| Light Coverage | 6000 m² |
| Fuel Type | Diesel |
| Color Temperature | 5000 K |
| Type | Tower Light |
| Mast Height | 8 m |
| LED Lifespan | 50000 hours |
| Beam Angle | 120 degrees |
| Protection Rating | IP67 |
Emphasizes using genuine parts for warranty coverage and proper function.
Details liability exclusion for unauthorized modifications or improper use.
Highlights hazards from neglecting maintenance or altering machine setup.
States copyright ownership and prohibits unauthorized copying or use.
Explains Atlas Copco's policy on safe and reliable products.
Covers general safety rules for unit operation, maintenance, and environment.
Provides guidelines for safe lifting, securing, and positioning of the unit.
Details safety measures for operating the light tower in various conditions.
Outlines safety procedures and precautions for maintenance and repair tasks.
Advises on proper tool selection and use to prevent accidents.
Provides safety guidelines for handling and servicing batteries.
Overview of the HiLight B6+ light tower features and application.
Explains various safety and informational markings on the unit.
Details the engine, cooling, safety devices, bodywork, and mast.
Describes the control panel, circuit breakers, and buttons for electrical systems.
Instructions for safely lifting the light tower using a hoist or forklift.
Guidelines for positioning the unit for operation and transport.
Procedures for indoor and outdoor installation requirements.
Details on connecting the light tower, including precautions for loads.
Checklists and procedures to perform before starting the engine.
Comprehensive guide to operating the light tower, including mast, lights, and engine.
Instructions for connecting external appliances to the light tower's power outlets.
Details on configuring the Lc1003™ controller, including buttons, display, and menus.
Configuration options for the Smart Mast™ controller, including functions and menus.
Provides a detailed schedule for daily, periodic, and yearly maintenance tasks.
Explains risks of low load operation and best practices to avoid damage.
Specific maintenance procedures for the alternator, including resistance checks.
Covers general engine maintenance, oil system, and filter servicing.
Details battery care, fuel filter replacement, air filter servicing, and LED replacement.
Specifies recommended fuels and oils for the engine, including PAROIL details.
Guidance for troubleshooting engine-related issues.
Information on interpreting and resolving controller alarms and trips.
Lists available mechanical options for the HiLight B6+ units.
Details specific mechanical options like the spark arrester.
Lists available electrical options for enhancing unit functionality.
Explains electrical options such as power outputs, auto start, and smart mast.
Guidelines for storing the light tower in a dry, frost-free environment.
Steps to take before operating the unit after a period of storage.
Atlas Copco's approach to minimizing environmental impact during product lifecycle.
Instructions for safely disposing of contaminated substances and machine parts.
Detailed technical data for the engine, alternator, and overall unit performance.
Specifications for torque values and allowed deviations for critical assembly bolts.
Illustrates the relationship between light intensity (lux) and distance from the tower.
Provides settings for floodlight rotation and inclination angles for optimal lighting.
Detailed dimensional drawings of the light tower.
Provides conversion factors between SI and British units for measurements.
Explanation of the information found on the unit's data plate.
To Next Page
