- 85 -
10.2 Critical bolt connections
Note: All the values mentioned above are applicable for dry or lightly oiled bolts.
Parts to assembly Dimension Quality
Applicable
standard
Torque
(Nm)
Allowed
deviation
(Nm)
Additional
treatment
Rotation system (central disc) M14 8.8 AC - STD 4369 115 ± 29
Mast - rotation system M8 8.8 AC - STD 4369 20 ± 5
Rotation system (canopy point) M8 8.8 AC - STD 4369 20 ± 5
Rotation system (base frame) M10 8.8 AC - STD 4369 41 ± 10
Friction plates M5 8.8 AC - STD 4369 5 ± 1.2
Base frame - forklift M12 8.8 AC - STD 4369 73 ± 18
Fuel tank - base frame M8 8.8 AC - STD 4369 20 ± 5
Mast - base frame M12 8.8 AC - STD 4369 73 ± 18
Lifting beam - ring structure M12 8.8 AC - STD 4369 73 ± 18
Small beams - lifting beam - ring M8 8.8 AC - STD 4369 20 ± 5
Mast - ring structure M12 8.8 AC - STD 4369 73 ± 18
Engine - support M10 8.8 AC - STD 4369 41 ± 5
Alternator - support M10 8.8 AC - STD 4369 41 ± 5
Engine - alternator flange M10 8.8 LINZ STD 25 Loctite 2107
Engine support - base frame M10 8.8 AC - STD 4369 41 ± 10
Alternator support - base frame M10 8.8 AC - STD 4369 41 ± 10
Shock absorber - engine support M10 8.8 AC - STD 4369 41 ± 10
Light support - mast tube M10 8.8 AC - STD 4369 41 ± 10
Floodlight support - light support M18 8.8 TEST 75 ± 5 Loctite 2107
Floodlight - floodlight support M10 8.8 TEST 20 ± 5
00_00_HiLight B6+_EN.book Page 85 Thursday, September 2, 2021 11:50 AM
To Next Page
Loading...
