- 25 -
3.2.3 Transportation and positioning
of the light tower onto vehicles
Due to its compact and optimized design, the
HiLight B6+ offers a great transport efficiency.
The light tower can be easily lifted and moved to
difficult areas thanks to its central lifting eye and
double forklift pockets in its frame. All that is needed
is a forklift truck or a mechanical arm.
The forklift pockets and the lifting eye can also be
used to place the light tower onto trucks for road
transportation. For safe transport of the light towers
on trucks or similar vehicles:
1. Ensure that the machine is stable and secure.
2. Check that the light tower is placed perfectly
horizontally (check the levels on top of the unit).
3. To ensure stability, use the fork lift slots (1) and
marked roof guides (2) to fix the light tower to the
transport vehicle.
4. Use straps or other means of anchoring, provided
that these do not affect the machine's safe
transportation and integrity.
5. It is recommended that the machine is covered by
a tarpaulin to protect it against bad weather
conditions if it is transported on an open truck.
Schematic overview:
Guide the straps carefully through
the marked roof guides at both sides
of the lifting beam to avoid that the
canopy gets damaged.
Transport of one single unit:
Transport of 2 units in parallel:
00_00_HiLight B6+_EN.book Page 25 Thursday, September 2, 2021 11:50 AM
To Next Page
Loading...
Need help?
General
