- 20 -
Towing
Before commencing towing, ensure you follow the
procedure below:
1. Check that the coupler (1) of the undercarriage of
the lighting tower is safely coupled to the towing
hook of the hauling vehicle.
2. Connect the cabling plug to the hauling vehicle so
that the rear lights of the lighting tower work
(indicators, lights, brake lights) (2).
3. Check that the pressure and condition of the tyres
are suitable for the road and the climatic
conditions.
4. Release the hand brake (3).
Periodic maintenance
Instructions
– If the lighting tower is not going to be used for a
moderate period of time, it is suggested that you
start and run the engine for a few minutes every 8
to 10 days. This will ensure that the machine
remains operational and is ready to be used when
needed.
– Regular maintenance is essential for the optimum
performance, safe operation and a longer working
life of the machine.
Precautions
– Before proceeding with any type of maintenance,
please take all the necessary precautions to avoid
accidentally starting the engine: disconnect the
battery, remove the starter key and push the STOP
button.
– Do not carry out any change or modification to
any part of the lighting tower or its electric
system.
– Do not carry out any maintenance when the
engine is running.
– Be careful when close to any moving parts (e.g.
pulleys, fans …) and to any hot parts (e.g. muffler,
engine block, coolants, lubricants …).
Do not proceed with towing if you
notice any broken or faulty parts.
Drive carefully according to the
road and climatic conditions.
To Next Page
Loading...
