- 24 -
– Dispose of waste oil properly. All lubricant oils
for engines and hydraulic circuits, both mineral
and synthetic, are classified as dangerous waste.
Disposing of waste oils in the environment would
pollute the ground and ground water and is
therefore strictly prohibited.
– It is recommended that you arrange for an
authorized service centre to change the oil so that
you ensure that the waste oil is disposed of
properly.
Fuel, oil and air filters
– Regularly perform maintenance work and replace
parts as indicated in the engine's Use and
Maintenance Manual.
– The engine should never run before filters have
been correctly installed. Open the rear door of the
lighting tower to access the engine and perform all
necessary maintenance operations. An
intermittent spanner icon will be displayed when
maintenance is requested.
– Do not smoke and maintain a safe distance from
flames and sparks while maintenance is being
carried out and when fuels and solvents are being
used.
Replacing the lamps
1. Release the 5 clamps and rotate them to open the
protection glass. The glass must stay hinged on
the bottom part of the spotlight (1).
2. Remove the lamp, first releasing the safety spring
(2) placed around the lamp and then unscrewing
the lamp from its seat (3).
3. Install the new lamp and replace the safety spring
(2).
4. Lock the protective glass using the 5 clamps and
remember to carefully tighten the screws with a
screwdriver.
Do not touch the lamps when they
are still hot without having taken all
necessary precautions. It is
recommended that protective gloves
are always worn.
1
To Next Page
Loading...
