Storage
•
Always oil the rock drill well, before you put it
into storage.
•
Always store the machine in a clean and dry
place.
•
Make sure that no foreign matter enters the
machine.
•
Protect the chuck using the plastic plug
provided with the machine. Alternatively, use a
wooden plug or a clean piece of cotton waste.
•
In the case of long-term storage, pour a
quantity of oil directly into the rock-drill's air
intake and then turn on the air briefly. This will
protect the machine from corrosion.
Disposal
A used machine must be treated and disposed of
in such a way that the greatest possible portion of
the material can be recycled and any negative
influence on the environment is kept as low as
possible, and in respect to local restrictions.
SRD 20, 25 Safety and operating instructions
© Construction Tools PC AB | 9800 1883 01 | 2017-05-31
Original instructions
19
To Next Page
Loading...
