Atlas Copco SRD 20

Technical data
Machine data
Model Part number Piston bore
mm
(in.)
Stroke length
mm
(in.)
Overall length
mm
(in.)
Weight
kg
(lb)
Shank
dimension
mm
(in.)
SRD 20 E 8311 0320 10 55
(2.16)
60
(2.36)
590
(23.2)
24
(53)
22 X 108
(⅞ x 4¼)
SRD 25 E 8311 0325 10 65
(2.56)
59
(2.32)
600
(23.6)
27
(60)
22 X 108
(⅞ x 4¼)
SRD 25 E 8311 0325 09 65
(2.56)
59
(2.32)
600
(23.6)
27
(60)
25 X 108
(1 x 4¼)
Model Air consumption (6 bar)
l/s
(foot
3
/min )
Impact rate (6 bar)
Hz
Hole diameter
mm
(in.)
SRD 20 E 39
(83)
35 28-34
(1.10-1.34)
SRD 25 E 50
(106)
34 29-40
(1.14-1.57)
SRD 25 E 50
(106)
34 34-50
(1.34-1.97)
Noise and vibration declaration statement
Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to EN ISO 11203.
Vibration value A and uncertainty B determined according to EN ISO 28927-10. See table ”Noise and
vibration data” for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
machine is used, as well as upon the exposure time and the physical condition of the user, and the condition
of the machine.
We, Construction Tools PC AB, cannot be held liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/
VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
Safety and operating instructions SRD 20, 25
20 © Construction Tools PC AB | 9800 1883 01 | 2017-05-31
Original instructions