Atlas Copco Tensor User Manual

12
TOOL SERVICE SETUP
In the
Tool Service Setup window you can see information about
last service date and number of tightenings after service. It is
also the start window to set the service date in the tool and the
service interval. You activate the service indicator by changing
the pull down menu to ON.
When clicking the "T ool Service
Reset" but ton, a new window is
shown where you set the
service interval and service
date. The default value is
250,000 tightenings, which is
also our max recommended
interval for a normal joint. When
pressing OK and STORE the
counter will be reset to 0.

Atlas Copco Tensor Specifications

General

Brand	Atlas Copco
Model	Tensor
Category	DC Drives
Language	English