4
1. Press the AUTOSET button once and ASEt/F1
appears on the display.
2. Choose final torque target by pressing
+/- buttons.
3. Press the ENTER button once to activate the
AutoSet function.
The Graph LED, lights up.
4. Resume tightening (5-8 times) until the Graph LED
disappear.
Optimum performance has been found and the system is ready
for production.
KEY PAD FUNCTIONS
AutoSet Programming:
The AutoSet Programming
feature allows the DS Drive to
recognise a joint’s stiffness and
adjust the tool for maximum
performance for that particular
joint accordingly.
/
To Next Page
Loading...
