18
TEX 140PS 150PE 180PS 190PE 220PS 230PE 270PS 280PE
© 2007 Atlas Copco Construction Tools AB
|
No. 9800 0800 01
|
2007-10-01
Overhaul instructions
2
Silencer
1
Testing the machine
For testing see the operating chapter in the Safety
and operating instructions.
Storage
Make sure that the machine is properly cleaned
before storage.
Always store the machine in a dry place.
Pour approx. 5 cl of oil directly into the air inlet
nipple, connect the machine to the compressed
air supply and start it for a few seconds.
Ź
Ź
Ź
Disposal
A used machine must be treated and disposed of
in such a way that the greatest possible portion
of the material can be recycled and any negative
influence on the environment is kept as low as
possible.
To Next Page
Loading...
Need help?
General
