5
TEX 140PS 150PE 180PS 190PE 220PS 230PE 270PS 280PE
© 2007 Atlas Copco Construction Tools AB
|
No. 9800 0800 01
|
2007-10-01
Overhaul instructions
SAFETY INSTRUCTIONS
To reduce risk of serious injury or death to yourself
or others, read these safety instructions before
operating or servicing the machine.
Post these safety instructions at work locations,
provide copies to employees, and make sure that
everyone reads the safety instructions before
operating or servicing the machine.
Comply with all safety regulations.
Safety symbols used
The indications Danger, Warning and Caution
have the following meanings:
Danger
Immediate hazard which
WILL result in serious or
fatal injury if the warning is
not observed.
Warning
Hazard or hazardous
procedure which COULD
result in serious or fatal
injury if the warning is not
observed.
Caution
Hazard or hazardous
procedure which COULD
result in injury or damage
to equipment if the warning
is not observed.
Personal precautions and
qualifications
Personal protective equipment
Always use approved protective equipment.
Operators and all other persons in the working
area must wear protective equipment, including at
a minimum:
Protective helmet
Hearing protection
Impact resistant eye protection with side
protection
Respiratory protection when appropriate
Protective gloves
Protective boots
z
z
z
z
z
z
Drugs, alcohol or medication
Drugs, alcohol or medication may impair your
judgment and powers of concentration.
WARNING Poor reactions and incorrect
assessments can lead to severe accidents or
death.
Never use the machine when you are tired
or under the influence of drugs, alcohol or
medication.
Prevent other people from using the machine if
they are under the influence of drugs, alcohol or
medication.
Maintenance, precautions
Use only authorised parts. Any damage or
malfunction caused by the use of unauthorised
parts is not covered by Warranty or Product
Liability.
Disposal, precautions
A used machine must be treated and disposed of
in such a way that the greatest possible portion
of the material can be recycled and any negative
influence on the environment is kept as low as
possible.
Ź
Ź
Ź
To Next Page
Loading...
Need help?
General
