Instruction Manual
2954 2510 03 69
4.11 Topping up/replacing coolant
• Verify if the engine cooling system is in a good condition (no leaks, clean,...).
• Check the condition of the coolant.
• If the condition of the coolant is outside the limits, the complete coolant should be replaced (see
section 4.11.3 Replacing the coolant).
• Always top-up with PARCOOL EG Concentrate / PARCOOL EG.
• Topping up the coolant with water only, changes the concentration of additives and is therefore
not allowed.
To Next Page
Loading...
