Instruction Manual
84 2954 2510 03
5.5.4 Brake adjustment wagon without ABS
Adjusting the linkage
• The parking brake is adjusted by using the turnbuckle (8). Adjust till the play in the linkage is 1-
3 mm (max. 3mm is allowed).
Apply the parking brake lever several times by hand with a force of 200 to 300 N and put it
back into the -not engaged- tooth “1” position. Adjust the turnbuckle (8) as described above.
Testing the parking brake
• For testing the parking brake, apply the parking brake lever. Brake power must be reached
between the 6
th
and 14
th
tooth of the toothed segment (“Z”).
(10)
"Z"
(9)
(7)
"Y"
"Y"
(11)
(11)
(8)
"Z"
"14"
"6"
"1"
Tighten all lock nuts (11) (Torque: 24 Nm).
To Next Page
Loading...
