Function
If the controller should indicate another time interval for the service plans than the one
stated in the instruction book, see section Preventive maintenance; the most strict
should be carried out. The compressor owner is responsible to carry out maintenance at
the given time intervals of the spare parts
• To reset the service plans that have been carried out.
• To check when the next service plans should be carried out.
• To check which service plans were carried out in the past.
• To modify the programmed service intervals.
Procedure
Starting from the Main screen (see Main screen),
• Move the cursor to the Menu action key and push the Enter key. Following screen appears:
• Use the Scroll keys to move the cursor to the Service icon.
• Push the Enter key and following screen appears:
Instruction book
2920 1815 04 127
To Next Page
Loading...
Need help?
General
