Packing/Transport/Storage 10
Kwik Bay
Packing/Transport/Storage
3.1 Packing
The packing of the lift is delivered in following components:
• N. 1 base units packed in a steel frame, wrapped up in non-scratch material
• N. 1 portable power unit packed in a plywood box, including N. 4 rubber pads
The average weight of the package is 1,441 LBS.
3.2 Lifting And Handling
When loading/unloading or transporting the equipment to the site, be sure to
use suitable loading (e.g. cranes, trucks) and hoisting means. Be sure also to
hoist and transport the components securely so that they cannot drop, taking
into consideration the package’s size, weight and center of gravity and it’s fragile
parts.
Hoist and handle only one package at a time
3.3 Storage And Stacking Of Packages
Packages must be stored in a covered place, out of direct sunlight and in low
humidity, at a temperature between 14°F and 104°F.
Stacking is not recommended: the package’s narrow base, as well as its
considerable weight and size make it diffi cult and hazardous.
To Next Page
Loading...
Need help?
General
