Installation 23
Kwik Bay
Installation
Only skilled technicians, appointed by the manufacturer, or by
authorized dealers, must be allowed to carry out installation.
Serious damage to people and to the lift can be caused if
installations are made by unskilled personnel.
7.1 Checking For Place Suitability
The lift has been designed to be used in covered and sheltered places free of
overhead obstructions.
The working place must not be next to washing areas, painting workbenches,
solvent or varnish deposits. The relevant standards of the local Health and
Safety at Work regulations, for instance, with respect to minimum distance to
wall or other equipment, escapes and the like, must be observed.
All areas next to the lift must be well and uniformly lit.
7.2 Concrete Surface
The lift must be placed on the concrete surface suffi ciently resistant. The
surface must be suitable for bearing maximum stress values, also in unfavorable
working conditions. The surface must be perfectly leveled.
7.3 Hydraulic System Connection
• Connect hydraulic hoses referring to Fig. 13;
• Tighten fi ttings thoroughly.
To Next Page
Loading...
Need help?
General
