Need help?Do you have a question about the Atlas SUNTEST XLS+ and is the answer not in the manual?
General| Type | Xenon Test Chamber |
|---|---|
| Light Source | Xenon Arc Lamp |
| Wavelength Range | 290 - 800 nm |
| Irradiance Control | Automatic |
| Temperature Control | Yes |
| Humidity Control | Automatic |
| Sample Capacity | Varies by model |
| Control | Microprocessor-based |
| Control System | Touchscreen interface |
| Cooling | Air Cooled |
| Weight | Varies by model |
| Standards Met | ASTM |
| Standards Compliance | ISO 4892, ASTM G155, SAE J2527, etc. |
| Irradiance | Adjustable |
| Irradiance Range | Adjustable |
Explains safety symbols and conformance marks used in the manual and on the equipment.
Provides instructions for authorized/unauthorized usage, commissioning, and disposal.
Details climatic conditions and physical space requirements for installing the equipment.
Explains how radiation is generated, filtered, and how UV/IR components are handled.
Details integrated sensors for irradiance, black standard temp., and test chamber temp.
Explains built-in safety and protection devices that enhance operational safety.
Lists and explains the safety labels and notices found on the equipment.
Provides instructions on how to mount the sample table, including safety warnings.
Instructions and warnings for connecting the equipment to the power supply.
Details how to set up equipment conditions, including safety precautions.
Outlines the steps for performing a standard test procedure.
Provides instructions for safely shutting down the equipment, including cooling.
To Next Page
