Atlas SUNTEST XLS+ User Manual

Operating manual SUNTEST XLS / XLS+
- 16 -
5
Accessories
Item Accessories Description Ident no.:
1Sensors:
1.1 XenoCal UV sensor Measurement and calibration of the irradiance;
measurement range 300 - 400 mm
5500 7270
1.2 XenoCal Global sensor Measurement and calibration of the irradiance;
measurement range 300 - 800 mm
5500 7271
1.3 Adapter for XenoCal sensors Holding plate for insertion of the XenoCal sensor
in the testing chamber
5607 7895
1.4 Black standard sensor (BST) Measurement of the black standard temperature
(BST)
5600 1490
1.5 White standard sensor (WST) Measurement of the white standard temperature
(WST) with digital display
5600 1491
1.6 White standard sensor (WST) Measurement of the white standard temperature
(WST), (separate readout device required)
5607 7906
1.7 Adapter for SST and WST sensor Holding plate for inserting the BST and WST
sensors in the test chamber
5607 7928
1.8 XENOVIEW, serial 9-pole Software package for transferring the test
parameters to a PC
5607 6813
1.9 XENOVIEW, serial 25-pole Software package for transferring the test
parameters to a PC
5607 6812
2 Filter:
2.1 UV special glass In addition to the coated quartz dish for working
with wave lengths greater than 290 mm
5605 2371
2.2 Special window glass In addition to the coated quartz dish for working
with wavelengths greater than 310 mm
5605 2372
2.3 Solar standard Filter according to COLIPA and DIN 67501 5607 7759
2.4 Solar ID65 Filter for illuminating according to the ICH
Guideline
5607 7769
2.5 Uncoated quartz disk Instead of the coated quartz dish for higher
black standard temperatures
5605 2373
3 Testing table
3.1 Water-cooled sample table For illuminating temperature-sensitive materials 5607 8013
4 Covering sheet
4.1 Set of covering sheets Covering sheets for direct visual comparison of
the weathered and unweathered test areas
5607 7980

Atlas SUNTEST XLS+ Specifications

General

Brand	Atlas
Model	SUNTEST XLS+
Category	Laboratory Equipment
Language	English