Operating manual SUNTEST XLS / XLS+
- 8 -
2.1 Supply schedule
The weathering equipment is available in two versi-
ons, the SUNTEST XLS or SUNTEST XLS+ .
The basic equipment of the SUNTEST XLS consists of:
• Xenon Lamp,
• Optical filter „coated quartz dish",
• UV reflector and light mirror,
• 2 Z-Rails,
• Sample table,
• Sensor for measurement and regulation of the irra-
diance (E),
• Control panel with rotary switch for stepless adjust-
ment of the irradiance, Xenon lamp operating hour
meter and ON/OFF switch of the Xenon lamp.
• ON / OFF switch
SUNTEST XLS+ is equipped with the following:
• Xenon Lamp,
• Optical filter „coated quartz dish“,
• UV-reflector and light mirror,
• Sample table,
• 2 Z-Rails,
• Sensor for measurement and control of the irradiance
(E),
• Sensor for measurement and control of the black stan-
dard temperature (BST),
• Sensor for measuring the test chamber temperature
(CHT),
• Program controller with a display for displaying data
and keyboard for data input,
• ON (I) / OFF (O) switch,
• Serial RS 232-port for connecting to a PC or a printer.
2
Installation of equipment
2.2 Packing material
• Impregnated wood palette made of compound wood
• Polyethylene foil (PE)
• Polyethylene foam (PE)
• Corrugated cardboard
• Plastic wrapping ribbon (PP)
To Next Page
Loading...
