What to do if there is overtemperature at the top of the lamp on my Atlas Test Equipment?
If there is overtemperature at the top of the lamp on your Atlas Test Equipment, notify Technical Service.
What to do if the water tank is empty in my Atlas Test Equipment?
If the water tank is empty, refill the water reservoir.
What to do if the lid of set is open on my Atlas Test Equipment?
If the lid of the set is open on your Atlas Test Equipment, close the device cover.
What to do if there is no water supply for humidifier in my Atlas Test Equipment?
If there is no water supply for the humidifier in your Atlas Test Equipment: * Check all tubing connections. * Check the water level in the reservoir.
What to do if Atlas Test Equipment displays 'Program parameters not valid'?
If you see the error message 'Program parameters not valid' after pressing the ENTER key, it might indicate a program intended for a different filter system. If no error message appears, reenter the program.
What to do if Atlas Test Equipment displays 'Program does not exist'?
If your Atlas Test Equipment displays 'Program does not exist', enter a test program.
What to do if there is no battery or the battery is discharged on my Atlas Test Equipment?
If there is no battery or the battery is discharged on your Atlas Test Equipment, notify Technical Service.
What to do if the lithium battery is older than 5 years on my Atlas Test Equipment?
If the lithium battery in your Atlas Test Equipment is older than 5 years, inform Technical Service at the next inspection.
What to do if the chamber temperature is too high on my Atlas Test Equipment?
If the chamber temperature is too high on your Atlas Test Equipment, notify Technical Service.
What to do if my Atlas Test Equipment displays 'Memory error'?
If your Atlas Test Equipment displays a 'Memory error', notify Technical Service. You can continue using the device. Reenter program, time, and filter system.
General| Type | Xenon Test Chamber |
|---|---|
| Test Chamber Volume | 100 L |
| Light Source | Xenon Arc Lamp |
| Lamp Power | 1500 W |
| Spectral Range | 290 - 800 nm |
| Power Supply | 230V, 50/60 Hz |
| Manufacturer | Atlas Material Testing Technology |
| Temperature Range | Ambient to 100°C |
| Filter Systems | Daylight, Window Glass, UV Filter |
| Control System | Touchscreen |
| Standards Met | ISO 4892, ASTM G155 |
| Black Panel Temperature Range | 40°C to 120°C |
To Next Page
