Atlas XENOTEST 150 S+ User Manual

51
Operating Instructions Xenotest
®
150 S+
9.1 Inspection
The instrument must be inspected annually.
The inspection comprises particularly:
• the safety instruments,
• the function of the program control.
NOTE - Warranty:
The manufacturer warrants the safety and correct function only
under the condition that:
• the inspection intervals are observed,
• all inspections are performed by adequately trained and qualified
personnel or by the Technical Service of ATLAS.
NOTE - Service package:
Atlas offers a instrument-specific service package that comprises
inspections, measuring service, and calibration service.
9.2 Repairs
Repairs must be performed only by adequately trained and qualified personnel or by
the Technical Service of Atlas MTT GmbH.
Use only original spare parts for installing or replacing instrument components.
Atlas is not liable for instrument components or spare parts from third-party suppliers.
NOTE - Service documents:
At request, Atlas will provide expert personnel with a complete
spare parts list and other repair documentation.
9 Maintenance

Atlas XENOTEST 150 S+ Specifications

General

Brand	Atlas
Model	XENOTEST 150 S+
Category	Laboratory Equipment
Language	English