Atlas XENOTEST 150 S+ - Measuring and Control Sensor System

27
Operating Instructions Xenotest
®
150 S+
5.7 Measuring and control sensor system
The Xenotest
®
150 S+ has a combined test chamber temperature and humidity sen-
sor permanently installed in the test chamber (see Fig. 5).
This sensor allows the temperature and the relative humidity in the test chamber to be
permanently defined and to be continuously controlled.
Functions of the sensor system:
• Display of the measured test chamber temperature on the control touch screen;
• Continuous control of the test chamber temperature to a predefined value of up
to 70 °C max;
• Display of the measured relative humidity in the test chamber on the control
touch screen;
• Constant control of the relative humidity in the test chamber to a predefined va-
lue of up to 95 % r.h. max.
5 Functional description