Atlas XENOTEST 150 S+ User Manual

9
Operating Instructions Xenotest
®
150 S+
1 Safety instructions
1.2 Use of the instrument
Correct use:
• The Xenotest
®
150 S+ is used for exposing material samples to irradiation and
weather.
• The instrument is suitable for continuous operation.
• The Xenotest
®
150 S+ has been tested for electromagnetic compatibility and is
suitable for installation in industrial applications.
Incorrect use:
• The Xenotest
®
150 S+ must not be operated in rooms that do not comply with
the location requirements.
• Do not use tissues, substances or liquids as samples if they are easily ignitable
or explosive.
• Do not use tissues, substances or liquids as samples if they release poisons.
1.3 Safety features of the instrument
Safety requirements:
• DIN EN ISO 12100, Part 1, Part 2 Issue 2004-04
Safety of machinery
• DIN EN 61010, Part 1 Issue 2002-08
Safety regulations for electrically operated measuring, control and laboratory
instruments. General requirements
• DIN EN 61010-2-010 Issue 2004-06
Risks from partial control failures
• DIN EN 50178 (VDE 0160): 1998-04
Equipment of high-voltage systems with electronic resources
• DIN EN 60204 (DIN VDE 0113): Part 1 Issue 1998-11
Electric equipment of industrial machinery
• DIN EN 563 and DIN EN 60598 Part 2 - 24 Tab. 1 and 2
Burns from hot surfaces
• DIN EN 45635 Part 8 and DIN EN 11690-1
Risks from noise
• DIN EN 60947-1 Issue 1999-12
Low-voltage switching instruments
• DIN EN 61508-3
Risks from software - Safety features
• DIN EN 60947-3 Issue 2001-12
Low-voltage switching instruments
• DIN EN 50274 Issue 2002-11 and DIN EN 60529-1 Issue 2000-09
Safety for fingers and backs of hands
• DIN EN 61558-1 Issue 1998-07
Transformers, safety

Atlas XENOTEST 150 S+ Specifications

General

Brand	Atlas
Model	XENOTEST 150 S+
Category	Laboratory Equipment
Language	English