Atlas XENOTEST 150 S+ - Delivery of the Instrument; Packaging; Standard Equipment

11
Operating Instructions Xenotest
®
150 S+
2.1 Packaging
Xenotest
®
150 S+ is delivered in a stable packaging box. All packaging materials can
be separated and are reusable.
• Packaging box made of plywood
• Steel bolts for securing the box and the box lid
• Polyethylene film (PE)
• Polyethylene foam (PE)
The following delicate components are packaged separately:
• Xenon lamp
• Exterior cylinder
2.2 Standard equipment
Xenotest
®
150 S+ is delivered in a non-operational state. For the start-up of the instru-
ment, the separately packaged xenon lamp must be installed.
The instrument comes with the following standard equipment:
Basic instrument with functional units:
• Irradiation system with xenon lamp
• Exterior cylinder made of special UV glass
• Synchronous transmission and rotating transmission
• Air cooling system
• Humidification system
Measuring system consisting of:
• Sensor for measuring the test chamber temperature and humidity
Technical documentation:
• Operating instructions
• Software documentation
• List of spare parts
NOTE - Testing equipment:
For conducting weathering and irradiation tests, additional sample
holders and an optical filter system are required.
2 Delivery of the instrument