Need help?Do you have a question about the Atlas SUNTEST CPS+ and is the answer not in the manual?
General| Brand | Atlas |
|---|---|
| Model | SUNTEST CPS+ |
| Category | Laboratory Equipment |
| Language | English |
Explains safety symbols used throughout the manual.
Provides essential safety instructions for instrument usage and unauthorized operations.
Lists all items included in the SUNTEST CPS+ package.
Details the packaging materials used for the instrument.
Specifies climatic conditions and space needed for instrument installation.
Outlines physical placement and spacing requirements for the SUNTEST CPS+.
Identifies and describes components visible on the front of the instrument.
Identifies and describes components visible on the rear of the instrument.
Details components within and related to the instrument's test chamber.
Explains how radiation is generated and modified by filters.
Describes the air flow system for cooling the instrument.
Details various filter systems and their simulation capabilities.
Presents graphs showing spectral irradiance for different filter configurations.
Explains the integrated sensors for irradiance and temperature measurement.
Describes built-in safety mechanisms and interlocks for instrument protection.
Highlights important safety labels found on the instrument.
Instructions for positioning the black standard sensor for accurate testing.
Steps for assembling the lamp, filters, and mirrors.
Procedure for accessing the instrument's internal radiation system.
Guides on cleaning and installing optical filters.
Steps for safely installing the xenon lamp.
Instructions for installing the UV and light mirrors.
Steps to secure the instrument's assembly compartment after installation.
Details on how to safely connect the instrument to the power source.
Initial setup and configuration steps before operation.
Step-by-step guide for performing a typical material test.
How to use the instrument with various optional accessories.
How to operate the instrument using its program controller and interface.
Procedures for safely shutting down the instrument after a test.
Instructions for permanently decommissioning and disposing of the instrument.
How to calibrate the instrument's irradiance measurement using a sensor.
Procedure for calibrating the black standard temperature sensor.
Detailed instructions for cleaning various parts of the SUNTEST CPS+.
Lists recommended spare parts and consumables for the instrument.
Details the annual maintenance checks required for the instrument.
Information on obtaining spare parts and warranty conditions.
Details various sensors for calibration and monitoring.
Lists available optical filters and their spectral properties.
Information about the sample table accessory.
Describes sample racks and automatic sample changers.
Details cover masks for sample comparison.
Information on the flood system for weather resistance testing.
Describes the cooling device for temperature-sensitive materials.
Lists miscellaneous accessories including lamps and filters.
To Next Page
