ATN ThOR Series - User Manual

operator’s manual
Important Export Restrictions! The products,
technologies and services contained in this manual are
subject to one or more export control laws and regulations
of the U.S. Government and they fall under the control
jurisdiction of the US Department of State. It is unlawful
and strictly prohibited to export, or attempt to export or
otherwise transfer or sell any hardware or technical data or
furnish any service to any foreign person, whether abroad or
in the United States, for which a license or written approval
of the U.S. Government is required, without first obtaining
the required lic e n se or written ap prova l fro m the ap propriate
Department of the U.S. Government having jurisdiction in
such matters. Diversion contrary to U.S. law is prohibited.
ATN ThOR Series
THERMAL OPTICAL RIFLESCOPES
THOR SERIES OPERATOR’S MANUAL (REV. 3, DECEMBER 2010)

Summary

Safety Summary and Cautions

Cautions for Safe Operation

Key safety precautions for handling precision electro-optical instruments and product warnings.

Section I. Introduction

Product Warranty and Liability

Details the one-year product warranty, exclusions, and limitation of liability.

Limitation of ATN Liability

Defines ATN's liability limitations concerning product use and potential damages.

Warranty Registration Process

Warranty Service Procedures

Product Description and Data

Technical Specifications

Provides detailed operational, electrical, mechanical, optical, and environmental specifications.

Mechanical Controls and Adjustments

Section II. Assembly and Preparation

Initial Scope Preparation

Covers unpacking the scope and installing batteries for operation.

Pre-Operation Scope Examination

Steps to check the scope before use, including power and image clarity.

Quick Release Mount (QRM) Installation

Instructions for attaching and detaching the QRM for weapon mounting.

Connecting for Video Output

External Power Source Connection

Details connecting an external 12V DC power supply to the scope.

Digital View Clip-on (DVC) Installation

Section III. Operation

Scope Controls and Indicators

Identifies and describes the various controls and indicators on the scope.

Detailed Operating Procedures

Powering On the Scope

Image Focusing Adjustment

Guides on adjusting the diopter and front lens for optimal image sharpness.

Display Polarity Modes

Reticle Illumination Adjustment

Windage and Elevation Adjustments

Scope Shut Down Procedures

Section IV. Maintenance Instructions

Preventive Maintenance (PMCS)

Details the checks and services required to maintain the scope.

Purpose of Preventive Maintenance

Troubleshooting Common Issues

Guides users in identifying and resolving common operating issues with the scope.

Troubleshooting Overview

Troubleshooting Steps and Solutions

Lists common problems, their probable causes, and corrective actions.

General Maintenance Procedures

Scope External Maintenance

Cleaning the Scope and Accessories

Preparing for Extended Storage

ATN ThOR Series Specifications