ATOMSTACK A5 10W - Page 5

2.3 Material safety
Do not engrave materials with unknown properties.Materials Recommended:Wood, bamboo, leather, plastic, fabric, paper, opaque
acrylic, glass.Materials not recommended:Metal, precious stones, transparent materials, reflective materials etc.
2.4 Use Safety
Use the engraver only in horizontal position and ensure that it has been securely fixed to prevent fires caused by accidental shifting or
dropping from the workbench during work.It is forbidden to point the laser to people, animals or any combustible object, whether it is
in working condition or not.
2.5 Power󵾯safety
To󵿎prevent󵿎accidental󵿎disasters󵿎such󵿎as󵿎fire󵿎and󵿎electric󵿎shock,󵿎the󵿎 󵿎Engraver󵿎provides󵿎a󵿎power󵿎adapter󵿎with󵿎a
ground󵿎wire.󵿎Plug󵿎the󵿎power󵿎plug󵿎into󵿎the󵿎power󵿎socket󵿎with󵿎a󵿎ground󵿎 wire󵿎when󵿎using the󵿎󵿎Laser󵿎Engraver.
2.6 Environment safety
Please ensure the workplace must be cleared while assembling engraving and cutting no flammable or explosive materials surrouding
the equitment. Have to set a metal plank under the bottom while engraving or cutting.