ATOMSTACK P7 Series User Manual

2.3 Material safety
Do not engrave materials with unknown properties. Materials Recommended:Wood, bamboo, leather, plastic, fabric, paper, opaque acrylic,
glass.Materials not recommended:Metal, precious stones, transparent materials, reflective materials etc.
2.4 Use Safety
Use the engraver only in horizontal position and ensure that it has been securely fixed to prevent fires caused by accidental shifting or
dropping from the workbench during work.It is forbidden to point the laser to people, animals or any combustible object, whether it is in
working condition or not.
2.5 Power safety
To prevent accidental disasters such as fire and electric shock, the Laser Engraver provides a power adapter with a
ground wire. Plug the power plug into the power socket with a ground wire when using the Laser Engraver.
2.6 Environment safety
Please ensure the workplace must be cleared while assembling engraving and cutting no flammable or explosive materials surrouding the
equitment. Have to set a metal plank under the bottom while engraving or cutting.

ATOMSTACK P7 Series Specifications

General

Software	LaserGRBL, LightBurn
Engraving Accuracy	0.01mm
Machine Material	Aluminum Alloy
Engraving Speed	10000mm/min
Material Compatibility	Wood, Acrylic, Leather, Plastic, Bamboo, Paper, Fabric
Connectivity	USB
Laser Wavelength	455nm
Laser Protective Cover	Yes
Input Format	BMP, JPG, PNG, DXF
Data Transmission Method	USB
Input Voltage	110V-220V
Power Supply	AC 100-240V, 50/60Hz