ATOMSTACK X7 Pro Series User Manual

Part 3: Disclaimer and warning
This󵿎product󵿎is󵿎not󵿎a󵿎toy󵿎and󵿎is󵿎not󵿎suitable󵿎for󵿎people󵿎under󵿎15.󵿎Do󵿎not󵿎allow󵿎children󵿎to󵿎touch󵿎the󵿎laser
module.󵿎Please󵿎be󵿎careful󵿎when󵿎operating󵿎in󵿎scenes󵿎with󵿎children.
This󵿎product󵿎is󵿎a󵿎laser module,󵿎visit󵿎http://www.atomstack3d.com/laserengraverdownload󵿎to get the
complete󵿎"user󵿎manual"󵿎and󵿎the󵿎latest󵿎instructions󵿎and󵿎warnings.󵿎Shenzhen󵿎AtomStack󵿎Technologies󵿎Co.,󵿎Ltd.󵿎(Atomstack)󵿎reserves󵿎the󵿎right󵿎to󵿎
update󵿎this󵿎Disclaimer󵿎and󵿎Safe󵿎Operation󵿎Guidelines.
Please󵿎be󵿎sure󵿎to󵿎read󵿎this󵿎document󵿎carefully󵿎before󵿎using󵿎the󵿎product󵿎to󵿎understand󵿎your󵿎legal󵿎rights,󵿎responsibilities󵿎and󵿎safety󵿎instructions;󵿎
Otherwise,󵿎it󵿎may󵿎bring󵿎property󵿎loss,󵿎safety󵿎accident󵿎and󵿎hidden󵿎danger󵿎of󵿎personal󵿎safety.󵿎Once󵿎you󵿎use󵿎this󵿎product,󵿎you󵿎shall󵿎be󵿎deemed󵿎to󵿎
have󵿎understood,󵿎󵿎and󵿎accepted󵿎all󵿎terms󵿎and󵿎contents󵿎of󵿎this󵿎document.󵿎User󵿎undertakes󵿎to󵿎be󵿎responsible󵿎for󵿎his󵿎or󵿎her󵿎actions󵿎and󵿎all󵿎conse
quences󵿎arising󵿎therefrom.󵿎User󵿎agrees󵿎to󵿎use󵿎the󵿎Product󵿎only󵿎for󵿎legitimate󵿎purposes󵿎and󵿎agrees󵿎to󵿎the󵿎entire󵿎terms󵿎and󵿎contents󵿎of󵿎this󵿎docu
ment󵿎and󵿎any󵿎relevant󵿎policies󵿎or󵿎guidelines󵿎that󵿎AtomStack󵿎may󵿎establish.
You understand and agree that AtomStack may not be able to provide you with the cause of the damage or accident and provide you with
AtomStack's after-sale service unless you provide the original engraving or cutting files, engraving software configuration parameters used,
operating system information, video of the engraving or cutting process, and operational steps prior to the occurrence of a problem or failure.
AtomStack󵿎is󵿎not󵿎liable󵿎for󵿎any󵿎and󵿎all󵿎losses󵿎arising󵿎from󵿎the󵿎user's󵿎failure󵿎to󵿎use󵿎the󵿎product󵿎in󵿎accordance󵿎with󵿎this󵿎manual,Without the
guidance of the company's technical personnel, users are prohibited from disassembling the machine by themselves. If this behavior occurs, the
loss caused by the user shall be borne by the user.
Atomstack󵿎has󵿎the󵿎ultimate󵿎right󵿎to󵿎interpret󵿎the󵿎document,󵿎subject󵿎to󵿎legal󵿎compliance.󵿎Atomstack󵿎reserves󵿎the󵿎right󵿎to󵿎update,󵿎modify,󵿎or󵿎ter
minate󵿎the󵿎Terms󵿎without󵿎prior󵿎notice.

ATOMSTACK X7 Pro Series Specifications

General

Engraving Accuracy	0.01mm
Operating Software	LaserGRBL, LightBurn
Engraving Area	400x400mm
Supported File Formats	BMP, JPG, PNG, DXF
Connectivity	USB
Material Compatibility	Wood, bamboo, leather
Cutting Material	Wood, bamboo, leather, acrylic, fabric, paper, etc.
Laser Protective Cover	Yes
Input Format	NC, BMP, JPG, PNG, DXF etc.
Data Transmission Method	USB
Laser Type	Semiconductor laser
Connection	USB
Laser Wavelength	455nm