middleatlantic.com | middleatlantic.ca
what great systems are built on.
™
96-037 / rev j / 12-5-16
Slim 5 Series
19” equipment racks
versatile rack frame system satisfies many
design requirements
features:
• Available in 20” and 26” useable depths to accommodate
deeper equipment
• Wide range of cabinet options makes rack adaptable
to a multitude of different installation environments
• Ready-to-assemble design saves space and freight
• Optional removable steel side panels provide security while
attractive thermolaminate side panel and options provides
aesthetic appeal for home and studio installations
• Optional casters can be bolted directly to bottom of rack
or concealed in skirted base
• Unique mechanically interlocking corner joint is central
to each unit’s exceptional strength and eases assembly
EIA compliant 19” gangable ready-to-assemble equipment rack shall be Middle Atlantic Products
model # 5-__ (refer to chart). Overall dimensions of rack shall be 19.125” W x __” D x __” H,
with a useable height of __ rack spaces (refer to chart). Rack shall have a 400 lb. weight
capacity. Slim 5 series rack shall be of ready-to-assemble construction. Rack top, bottom and
horizontal braces shall be phosphate pre-treated and finished in black powdercoat. Rack uprights
shall be 11-gauge steel rackrail with tapped 10-32 mounting holes in universal EIA spacing with
black e-coat finish and numbered rack spaces. Rack features eight 1/2” or 3/4” cable knockouts,
four in top and four in base. Rack shall be UL listed in the US and Canada to the UL-2416 (NWIN)
category. Rack shall be GREENGUARD Gold Certified. Rack shall meet the RoHS EU Directive
2011/65/EU. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company.
Rack shall be warrantied to be free from defects in material or workmanship under normal use and
conditions for the lifetime of the rack.
Customizable specification clips available at middleatlantic.com
specifications:
options:
• Front doors* shall be solid, model # DO-5-x, plexi model
# DOP-5-x
• Removable side panels shall be constructed of either
steel or 3/4” thermolaminate. Both include steel locking
clips to secure side panels
• Rear access pan shall be constructed of steel and come
with keylock
• Cable Chase kit shall be constructed of steel, 3 inches
wide for wire clearance when ganging
• Adjustable Split Rackrail* (for rear equipment support)
shall be constructed of 11-gauge steel
• Casters, set of four, shall have a total weight capacity
of 900 lbs.
• Leveling feet part # LF, shall be 3/8” threaded steel,
and shall be adjustable from top or bottom
• Runner kit shall be 5-RSxx.
• Fan kit shall be 5-FAN-K and shall displace 114 CFM
of free air
• Bracket required to mount vertical power shall be model
PB-5A
*NOTE: To use this option in a multi-bay configuration,
a cable chase is required.
top shown with optional
5-FAN-K fan kit
EIA/TIA COMPLIANT
To Next Page
Loading...