middleatlantic.com | middleatlantic.ca
what great systems are built on.
™
96-976 / rev e / 11-1-16
PD Series
slim power strips
high density power strips feature a slim,
low-profile design and staggered outlets
to accommodate plug-in power supplies
features:
• UL Listed and CSA certified (PD-2420SC-NS UL Listed only)
• (1) 15 or 20 amp circuit depending on model
• Includes SignalSAFE™ power cord terminated with NEMA 5-15P
or NEMA 5-20P plug depending on model
• Up to 24 outlets depending on model
• Outlets spaced to accommodate plug-in power supplies
• Circuit breaker or MOV surge & EMI filter & breaker protected,
depending on model
• Mounting hardware included
• Slim low-profile design requires less space
• Gray outlets easy to see in rear of enclosures
• Lightweight anodized aluminum chassis
* For additional Vertical Power Strips, please see A&E Spec # 96-938
High density slim power strip shall be Middle Atlantic Products model # PD-__-__ with __ outlets
and __ amps (refer to chart). Slim power strip shall be__” long x 1.25” deep x 1.6” wide and shall
have gray __ NEMA ___ outlets (refer to chart) in unique spacing pattern that allows up to __
plug-in power supplies (refer to chart). Slim power strip includes __ amp circuit breaker protection
and mounting hardware (refer to chart). Terminated with ___ (refer to chart) SignalSAFE™ power
cord with NEMA ___ plug (refer to chart). Grounding and bonding stud shall be 1/4 - 20 threaded.
Slim power strip shall be ETL listed to UL standards 1149 and 1363 in US and to CAN/CSA standard
C22.2 #8 and C22.2 #21 in Canada. Slim power strip shall be RoHS EU Directive 2011/95/EC
compliant. Slim power strip shall be manufactured by an ISO 9001 registered company. Slim power
strip shall be warrantied to be free from defects in material or workmanship under normal use and
conditions for a period of 3 years.
Customizable specification clips available at middleatlantic.com
specifications:
options:
• Model # PB-XS, rackmounting bracket shall mount
any 8 outlet power strip (PD-815SC, PD-815SC-NS)
between rackrail of any EIA compliant 19” rack.
Includes cable management tie points
• Model # PB-5A mounting brackets shall accommodate
the mounting of vertical power strips to rackrail of any
rack
• Model # PB-DWR mounting bracket shall accommodate
the mounting of vertical power strips to rear rackrail of
Middle Atlantic Products DWR & SR series wall racks
PD-2415SC-NS
PD-815SC-NS
To Next Page
Loading...