FEATURES
|
54
Lockdown Boat Cover—If Equipped
The lockdown boat cover is designed to protect your boat during trailering and
short-term storage.
Start by installing the cover from the stern of the boat and unfold the cover
as you move it fore. The cover has a label “REAR” to identify the stern end of
the cover.
After the cover is installed, use the clamp strap to draw the cover snug
around the boat, below the rub rail. Pull the excess strap aft, and winch the
clamp to draw the cover. Lock the clamp. Position any excess strap into the
protective boot and zip closed to protect the clamp from possibly making
contact with your boat.
Boat Cover warranty is covered by OEM manufacturer.
To Next Page
Loading...