EasyManua.ls Logo

AU E10K - Audio and Mode Settings

AU E10K
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Making and Answering Calls
Adjusting the Earpiece Volume
during a Call
During a call, use j.
u : Increases the volume.
d : Decreases the volume.
Turning On Manner Mode
When the standby screen is displayed, hold down
( for at least one second.
This turns on manner mode, and displays , and on the
standby screen. This also turns on Answer memo, which is
indicated by
on the standby screen.
Turning Off Manner Mode
When the standby screen is displayed, hold down ( for
at least one second.
Turning off manner mode causes
, and to disappear
from the standby screen. Answer memo is also turned off,
which is indicated by
disappearing from the standby
screen.
Even in manner mode, the cell phone still emits a
sound when autofocusing, a shutter sound when you
take a photo.
Changing the Incoming Ring Tone
When the standby screen is displayed, press c.
Use a to select Set Functions and then press
c (Select).
Use j to select Tone/Vib/Lamp and then press
c (Select).
Use j to select Incoming Setup and then press
c (Select).
Use j to select Incoming Call and then press
c (Select).
Use j to select Melody and then press
c (Select).
Use j to select Fixed RingTone and then press
c (Select).
Use j to select Preset Data and then press
c (Select).
Use j to select the ring tone and then press
c (OK).
The incoming ring tone is set.
If you press % (Play), the tone plays.

Table of Contents

Related product manuals